How to clean your split air conditioning systems

Author: H & H Air Conditioning   Date Posted:2 July 2014 

When was the last time your inspected the health of your air conditioning system?

HOW TO CLEAN SPLIT SYSTEM FILTERS:

1.    Firstly, make sure power to the unit is turned off.

2.    Lift cover on the front of the air conditioning unit (external         casing) then pull the filter out. Check to see the specific             requirements for your model.

3.    Once you’ve removed the air filter, it’s a good idea to check for       any tears or holes in the mesh. If there is significant damage,         you’ll need a replacement filter from H&H Air Conditioning.

4.    Getting out the vacuum cleaner, suck away any loose dust, cobwebs       and other grime.

5.    Submerge the filter in a bath tub or large basin full of warm           water for several minutes. Move the filter around in the water to       dislodge any material stuck to the mesh surface.

6.    Drain water and then refill basin or tub with a solution of warm       water and vinegar – mixed in equal proportions.

7.    Leave for about 5 minutes and remove from tub. Leave to dry before placing back in AC unit.


http://www.hhaircon.com.au/news/air-conditioning-efficiency-advice/filters-the-lungs-of-your-air-conditioning-system

Leave a comment

Comments have to be approved before showing up